About The Author

Ryan enjoys conceptualizing ideal implementations of products and then helping to make them happen. A backend dev, Ryan loves developing custom APIs almost as … More about Ryan

A Guide To Starting Your Own Rails Engine Gem

Quick Summary

Since Rails 3 was released, developers have been writing Rails engines in a new clean style that can be packaged as RubyGems. A Rails engine is a prepackaged application that is able to be run or mounted within another Rails application. An engine can have its own models, views, controllers, generators and publicly served static files. Now, unless you like writing a lot of code, this is great news, because it means you can write an engine once and use it over and over again. Let’s say you build a lot of websites for small businesses. A common requirement for such websites is a page listing all of the employees at a company and some basic information about them. This is a great candidate for a Rails engine gem because the functionality will change very little and can be abstracted to a common set of requirements.

Table of Contents
Membership counter

Members support Smashing

Wonderful, friendly people who keep this lil' site alive — and get smarter every day.

Are you smashing, too? →

Since Rails 3 was released, developers have been writing Rails engines in a new clean style that can be packaged as RubyGems. A Rails engine is a prepackaged application that is able to be run or mounted within another Rails application. An engine can have its own models, views, controllers, generators and publicly served static files.

Now, unless you like writing a lot of code, this is great news, because it means you can write an engine once and use it over and over again. Let’s say you build a lot of websites for small businesses. A common requirement for such websites is a page listing all of the employees at a company and some basic information about them. This is a great candidate for a Rails engine gem because the functionality will change very little and can be abstracted to a common set of requirements.

Further Reading on SmashingMag:

In this post, we’ll walk through the process of creating an engine gem that you would use to create a database-backed team page displaying a list of employees.

Enginex

Jose Valim, a core Rails contributor, has created a tool named Enginex, which scaffolds Rails 3-compatible engine gems. This tool protects you from many of the gotchas that engine gem developers face. It provides basic set-up, including a test Rails application, which you’ll need to get started.

To begin, run the following from the command line in your standard projects directory:

gem install enginex
enginex team_page

With this, you will end up with a project in the team_page directory containing the standard Enginex scaffolding.

Set-Up

To set up our gem, we’ll modify a few files. First, our team_page.gemspec and our Gemfile need a little love.

# CURRENT FILE :: team_page.gemspec
require File.expand_path("../lib/team_page/version", __FILE__)

# Provide a simple gemspec so that you can easily use your
# Enginex project in your Rails apps through Git.
Gem::Specification.new do |s|F
  s.name                      = "team_page"
  s.version                   = TeamPage::VERSION
  s.platform                  = Gem::Platform::RUBY
  s.authors                   = [ "Your Name" ]
  s.email                     = [ "your@email.com" ]
  s.homepage                  = "http://yourwebsite.com"
  s.description               = "A simple Rails 3 engine gem that adds a team page to any Rails 3 application."
  s.summary                   = "team_page-#{s.version}"

  s.rubyforge_project         = "team_page"
  s.required_rubygems_version = "> 1.3.6"

  s.add_dependency "activesupport" , "~> 3.0.7"
  s.add_dependency "rails"         , "~> 3.0.7"

  s.files = `git ls-files`.split("n")
  s.executables = `git ls-files`.split("n").map{|f| f =~ /^bin/(.*)/ ? $1 : nil}.compact
  s.require_path = 'lib'
end
# CURRENT FILE :: Gemfile
source "http://rubygems.org"
# Specify any dependencies in the gemspec
gemspec

This sets up our gemspec to automatically use files we have committed with Git, and any executables we may add in the future, and to use the VERSION constant that we’ll specify in our gem.

Also, by calling gemspec in our Gemfile, running bundle install will load dependencies from our team_page.gemspec, which is the convention.

Next, to turn our gem into a Rails engine, let’s add or modify three files. First, our top-level team page file:

# CURRENT FILE :: lib/team_page.rb
# Requires
require "active_support/dependencies"

module TeamPage

  # Our host application root path
  # We set this when the engine is initialized
  mattr_accessor :app_root

  # Yield self on setup for nice config blocks
  def self.setup
    yield self
  end

end

# Require our engine
require "team_page/engine"

To use the mattr functions, our ActiveSupport dependencies are required. We also set up a nice way to configure our gem with the self.setup method. The engine is required at the end of our file so that we can be sure that any dependencies are specified first.

Secondly, our version file:

# CURRENT FILE :: lib/team_page/version.rb
module TeamPage
  VERSION = "0.0.1"
end

Lastly, our engine file:

# CURRENT FILE :: lib/team_page/engine.rb
module TeamPage

  class Engine < Rails::Engine

    initialize "team_page.load_app_instance_data" do |app|
      TeamPage.setup do |config|
        config.app_root = app.root
      end
    end

    initialize "team_page.load_static_assets" do |app|
      app.middleware.use ::ActionDispatch::Static, "#{root}/public"
    end

  end

end

This defines two Rails initialize blocks that clue us into the root directory of our host Rails application, as well as serve up any files in the root public directory of our gem.

Data Model

To add a model in our gem, we first need to specify a migration and a generator class to copy it over to the host Rails application. Although this process will become much more transparent in Rails 3.1, we now need to build some generator classes. A great resource for this can be found over at Nepal on Rails.

First, let’s add our generators class:

# CURRENT FILE :: lib/generators/team_page/team_page_generator.rb
# Requires
require 'rails/generators'
require 'rails/generators/migration'

class TeamPageGenerator < Rails::Generators::Base
  include Rails::Generators::Migration
  def self.source_root
    @source_root ||= File.join(File.dirname(__FILE__), 'templates')
  end

  def self.next_migration_number(dirname)
    if ActiveRecord::Base.timestamped_migrations
      Time.new.utc.strftime("%Y%m%d%H%M%S")
    else
      "%.3d" % (current_migration_number(dirname) + 1)
    end
  end

  def create_migration_file
    migration_template 'migration.rb', 'db/migrate/create_team_members_table.rb'
  end
end

Adding this will allow developers to run rails g team_page from within their Rails application and to create the necessary migration file to power our team page.

Next, we’ll put together a sample migration:

# CURRENT FILE :: lib/generators/team_page/templates/migration.rb
class CreateTeamMembers < ActiveRecord::Migration
  def self.up
    create_table :team_members do |t|
      t.string :name
      t.string :twitter_url
      t.string :bio
      t.string :image_url
      t.timestamps
    end
  end

  def self.down
    drop_table :team_members
  end
end

Finally, we can create a sample model namespaced to our gem.

# CURRENT FILE :: app/models/team_page/team_member.rb
module TeamPage
  class TeamMember < ActiveRecord::Base
    attr_accessible :name , :twitter_url , :bio , :image_url
  end
end

What we’ve done so far is walked through the steps for bootstrapping a Rails 3 engine gem. It has been configured as an engine, given its own migration generator, and supplied with an ActiveRecord model.

Now, let’s set up our gem with a route, controller and view that any host Rails application can use.

The Route

Rails engines gems, when set up properly, automatically load the config and app directories of our project. This is handy because it enables us to set up our code with exactly the same structure as a full Rails application.

So, to set up our route, create a routes.rb file in the config directory of our project. To have it match on the team route, let’s do the following:

# CURRENT FILE :: config/routes.rb
Rails.application.routes.draw do
  get "team" => "team_page/team#index" , :as => :team_page
end

A bit of pain can be avoided by examining what we’ve done here. First, we’re going to match the /team route from any requests to our host Rails app.

Secondly, we’ve told Rails to send requests to the index route of the namespaced controller that we’re going to create in our engine. Namespacing our controller is best practice because it isolates our engine code from any application that it’s included in.

Lastly, our route is named so that we can use link helpers elsewhere in our application.

The Controller

Our controllers will live in the app directory, just as we’re used to. One caveat is that we’ll want to place them in a team_page directory, just as we did with our model. It simply needs to load all of our team members to be displayed on the page.

# CURRENT FILE :: app/controllers/team_page/team_controller.rb
module TeamPage
  class TeamController < ::ApplicationController
    def index
      @team_members = TeamMember.all
    end
  end
end

As you can see, we’ve subclassed our top-level ::ApplicationController, which lives in the host Rails application.

The View

To finish off, we need a view to render. By default, it will use the main application layout from our host Rails application, since we didn’t specify a different layout in the controller.

Just as we did with our model and controller, we’ll nest our view in a team_page directory. Because we want to minimize external dependencies, we’ll write our views in ERB instead of something like HAML.

<!-- CURRENT FILE :: app/views/team_page/index.html.erb -->
<ul class="team-member-list">
  <% @team_members.each do |team_member| %>
  <li class="team-member">
    <span class="team-member-name">
      <%= link_to @team_member.name , @team_member.twitter_url %>
    </span>
    <%= @team_member.bio %>
    <%= image_tag @team_member.image_url , :class => "team-member-image" %>
  </li>
  <% end %>
</ul>

Getting Started With Tests

Obviously, we haven’t yet written any unit or integration tests here to cover the gem that we created. Completing this exercise will improve your understanding of Rails 3 engine gems. The enginex tool we used automatically creates a test directory for you with a basic Rails application.

Let’s start by making sure our test_helper.rb file is up to snuff.

# CURRENT FILE :: test/test_helper.rb
# Configure Rails Environment
ENV["RAILS_ENV"] = "test"
ENV["RAILS_ROOT"] = File.expand_path("../dummy",  __FILE__)

require File.expand_path("../dummy/config/environment.rb",  __FILE__)
require "rails/test_help"

ActionMailer::Base.delivery_method = :test
ActionMailer::Base.perform_deliveries = true
ActionMailer::Base.default_url_options[:host] = "test.com"

Rails.backtrace_cleaner.remove_silencers!

# Run any available migration
ActiveRecord::Migrator.migrate File.expand_path("../dummy/db/migrate/", __FILE__)

# Load support files
Dir["#{File.dirname(__FILE__)}/support/**/*.rb"].each { |f| require f }

One thing to notice, which is unusual for a testing set-up helper, is that we aren’t requiring our local gem code anywhere in the test helper. Because we’re using Bundler, our gem is actually required in the dummy Rails app via our Gemfile at test/dummy/config/application.rb. Other than that, we’re setting up our Rails environment, booting the application and running any available migrations. Here’s a glance at a sample unit test.

# CURRENT FILE :: test/team_page_test.rb
require 'test_helper'

class TeamPageTest < ActiveSupport::TestCase

  test "truth" do
    assert_kind_of Module, TeamPage
  end

  test 'setup block yields self' do
    TeamPage.setup do |config|
      assert_equal TeamPage, config
    end
  end

end

To continue playing around with how engine testing and integration in a Rails app work, head to the test/dummy/ Rails app and boot the server or play in the console. Everything should work in there as well as it would in any other Rails application.

Resources And Tips

Here are a few helpers to make sure you’re on the right track. The following represents what you would expect the directory structure to look like for your engine gem after following the code examples in this article.

## DIRECTORY STRUCTURE
#

- team_page/
  - app/
    - controllers/
      - team_page/
        + team_controller.rb
    - models/
      - team_page/
        + team_member.rb
    - views/
      - team_page/
        + index.html.erb
  - config/
    + routes.rb
  - lib/
    - team_page.rb
    - generators/
      - team_page/
        + team_page_generator.rb
        - templates/
          + migration.rb
    - team_page/
      + engine.rb
      + version.rb
  - test/
    + team_page_test.rb
    + test_helper.rb
  + team_page.gemspec
  + Gemfile
  + Gemfile.lock

Here’s a simple script to load some team members into your database.

## DATA SEED
#
# => Method 1
# Copy the code into your application's db/seeds.rb file.
#
# => Method 2
# If you would like to run this code in the engine that you are
# developing, place it in the seeds file inside of the dummy app
# contained in your integration tests.
#
# With either of the above methods, be sure to run the following from
# your command line…
#
#     rake db:seed
#

5.times do |i|

  TeamPage::TeamMember.create!( {
    :name        => "Team Member #{i}",
    :twitter_url => "http://twitter.com/team_member_#{i}",
    :bio         => "A really fancy team member!",
    :image_url   => "http://bit.ly/muSWki"
  } )

end

Some External Resources

Conclusion

The goal of this post was to demonstrate how straightforward it is to create a Rails engine packaged as a Ruby gem.

To recap, we’ve boostrapped our gem, added a model and migration generator, set up a route to hit our controller, created a sample view, and wrote some example tests. This process can be used for any engine gem you feel you need, and it can speed up development time and improve the reliability and maintainability of your code bases. The possibilities are endless. What will you build?

Smashing Editorial (al)